Danfoss ECL Comfort 210 Installation Manual page 108

Installation Guide
ECA MENU > ECA system > ECA override
Override circuit
Setting range
OFF / 1 ... 4
The feature 'Override' (to extended comfort or saving
period or holiday) must be addressed to the heating circuit
in question.
OFF:
No heating circuit is selected for override.
1 ... 4: The heating circuit number in question.
ECA MENU > ECA system > ECA version
ECA version (read-out only), examples
087H3200
Code no.
A
Hardware
1.42
Software
5927
Build no.
Serial no. 13579
Production week 23.2012
The ECA version information is useful in service situations.
108 DEN-SMT/DK
ECL Comfort 210 / 310, application A260
Factory setting
OFF The circuit in question for override in the ECL controller must be in
scheduled mode.
See also the parameter 'Override addr.'.
Example 1:
(One ECL controller and one ECA 30 / 31)
Override of heating
circuit 2:
Example 2:
(Several ECL controllers and one ECA 30 / 31)
Override of heating
circuit 1 in ECL
controller with the
address 6:
Quick guide "ECA 30 / 31 to override mode":
1. Go to ECA MENU
2. Move cursor to "Clock" symbol
3. Select the "Clock" symbol
4. Choose and select one of 4 override functions
5. Below the override symbol: Set hours or date
6. Below hours / date: Set desired room temperature for the override
period
VI.LG.F2.02
Set 'Connection addr.' to Set 'Override
15 circuit' to 2
Set 'Connection addr.' to 6 Set 'Override
circuit' to 1
Danfoss District Energy