Settings; Initial Settings - Danfoss DEVI DEVIreg Touch Installation Manual

3. Mount and reassemble the thermostat.
• Fasten the thermostat to a socket or an exterior wall
box by driving the screws through the holes in each
side of the thermostat.
• Put the frame on.
• Click the display module back in place.
Important: Do NOT press on the display screen when click-
ing the display module back in place.
Initially main supply the thermostat for 15 hours to fully
charge the battery. The current time and day is then kept
for 24 hours if mains supply is off. All other settings are
stored permanently.
3

Settings

3.1

Initial Settings

Initial settings must be specified when the unit is activated
for the first time:
10
DEVIreg™ Touch
Installation Guide