Danfoss ECL Comfort 210 Installation Manual page 36

Installation Guide
Setting the desired temperature
Depending on the chosen circuit and mode, it is possible to enter
all daily settings directly from the overview displays (see also the
next page concerning symbols).
Setting the desired room temperature
The desired room temperature can easily be adjusted in the
overview displays for the heating circuit.
Action: Purpose:
Desired room temperature
Confirm
Adjust the desired room temperature
Confirm
This overview display informs about outdoor temperature, actual
room temperature as well as desired room temperature.
The display example is for comfort mode. If you want to change
the desired room temperature for saving mode, choose the mode
selector and select saving.
Setting the desired room temperature, ECA 30 / ECA 31
The desired room temperature can be set exactly as in the
controller. However, other symbols can be present in the display
(please see 'What do the symbols mean?').
36 DEN-SMT/DK
ECL Comfort 210 / 310, application A260
Examples:
20.5
21.0
If the temperature value is displayed as
"- -" the sensor in question is not connected.
"- - -" the sensor connection is short-circuited.
The setting of the desired room temperature is important even if a
room temperature sensor / Remote Control Unit is not connected.
With the ECA 30 / ECA 31 you can override the desired room
temperature set in the controller temporarily by means of the override
functions:
VI.LG.F2.02
Danfoss District Energy