Defining Isdn Trunk Termination Side For Qsig - AudioCodes Mediant 1000 MSBG Installation And Configuration Manual
Enhanced media gateway and sba for microsoft lync
Hide thumbs
Also See for Mediant 1000 MSBG:
- Configuration note (60 pages) ,
- Release notes (178 pages) ,
- Cli reference manual (160 pages)
Table of Contents
Advertisement
Installation and Configuration Manual
4.6.7
Defining ISDN Trunk Termination Side for QSIG
The procedure below describes how to change the ISDN termination side (User or Network side)
for QSIG settings.
To define the Trunk ISDN termination side:
1.
Open the 'Trunk Settings' page (Configuration tab > PSTN Settings menu > Trunk
Settings).
2.
Click the Trunk icon pertaining to the trunk you want to configure, and then click Stop Trunk
to de-activate the Trunk.
3.
From the 'ISDN Termination' drop-down list, select whether the Trunk connected to the PBX
is User or Network side.
4.
Click Apply Trunk Settings to apply the settings.
5.
Save (burn) the Media Gateway configuration and reset the Media Gateway, using the Web
interface's 'Maintenance Actions' page (Management Configuration menu > Maintenance
Actions).
SBA for Microsoft Lync
Figure 4-27: Trunk Settings Page
83
4. Configuring the Enhanced Media Gateway
3
December 2010
Advertisement
Table of Contents
