CLI Reference Guide
5.6
coders-and-profiles coders-group
This command defines the Coders Group table.
Syntax:
The syntax of this command includes the following variations:
coders-and-profiles coders-group-<0-4> <index>
set <parameter> <value>
The command syntax format is described below:
Arguments
<parameter> <value>
Defaults
NA
Command Modes
Enable
Examples:
The following example defines the Coders Group table and sets the name.
(config-voip)# coders-and-profiles coders-group-0 1
(coders-group-0-1)# set name tjones
Version 6.4
Sets the following table parameters:
Name
PayloadType
Sce
defaults
pTime
rate
For a description of these parameters, refer to the User's Manual.
77
5. VoIP Commands
Description
January 2012