Exploded View - Polaris 2009 Ranger RZR 800 EFI Manual

BODY / STEERING / SUSPENSION
4. Remove the (2) upper radiator retaining bolts.
5. Remove the (4) bolts retaining the lower radiator mount
bracket and remove the bracket from the frame.
6. Allow radiator to sag down to allow access to recovery
bottle retaining screws and filler neck retaining screws.
7. Remove both sets of retaining screws and allow the
recovery bottle and filler neck to hang down to access the
(4) bolts retaining the upper radiator mount bracket.
Filler
Neck
8. Remove the (4) bolts retaining the upper radiator mount
bracket and remove the bracket from the frame.
5.22
9. Lift up on the stabilizer bar and remove it from the vehicle.
10. Inspect the stabilizer bar for straightness. Inspect the
bushings and replace if needed.
11. Reverse the procedure for installation. Torque the linkage
fasteners to 27-33 ft. lbs. (37-45 Nm).

Exploded View

Recovery
Bottle
Linkage
Main
Frame
T30
Screws
Stabilizer
Grease
Bar
Zerk
Clamp
Nuts
Spacer
Mount
Bracket
Clamp
Bushings
Linkage
27-33 ft. lbs.
(37-45 Nm)