Table of Contents
Advertisement
CLUTCHING
4.
Line up the "X" on the moveable sheave with the "X" on
the stationary sheave or use the marks previously used. Put
the sheaves together.
Align X's
5.
Install the roller (A) onto the roller pin (B) on both sides.
A
B
6.24
6.
Install the roller pin into the sheave assembly on both sides.
The flat side of the roller pin faces downward when the
shaft side is laying flat on the bench.
Flat Side Down
7.
Install the spring pins (C) to secure the roller pins. Install
until flush with sheave surface.
8.
Install the spring over the shaft.
9.
Install the clutch rollers (D) onto each side of the outside
spider. Install the washers (E) and E-clips (F) to secure the
rollers. The rollers should spin freely.
C
Advertisement
Chapters
Table of Contents
Troubleshooting
