Cooling System Exploded View; Cooling System Bleeding Procedure - Polaris 2009 RANGER 700 Service Manual

Cooling System Exploded View

Engine Inlet Hose
Surge Tank

Cooling System Bleeding Procedure

WARNING
Always wear safety glasses and proper shop
clothing when performing the procedures in this
manual. Failing to do so may lead to possible
injury or death.
CAUTION
Use caution when performing these procedures.
Coolant may be hot and may cause
severe injury or burns.
NOTE: If the coolant level is LOW in the radiator, or
if there are leaks in the system, the coolant system
will not draw coolant from the reservoir tank.
NOTE: Use this procedure when a unit overheats
and no apparent leaks in the cooling system are
found.
Engine Outlet Hose
Fan
Shroud
1.
2.
3.
Radiator Inlet Hose
Radiator Outlet Hose
Drain Plug
Place the vehicle in Neutral and set the parking brake.
CAUTION
Be sure the engine has cooled and there is no
pressure built up in the cooling system before
removing the radiator cap. The coolant may be
hot and could cause severe injury or burns.
Remove radiator cap (A) and top off coolant.
Remove surge tank fill cap (B) and fill the surge tank to the
full line.
B
ENGINE
3
Radiator Cap
Radiator
A
3.15