Polaris 2009 Ranger RZR 800 EFI Manual page 203

9. Press out the spring pins (K) in the inner sheave.
10. Pull out the clutch roller pins (L) and rollers (M).
11. Press the shaft and bearing out of the outer sheave using a
press.
Press Shaft and
Bearing Out
K
M
L
K
Inspect Bearing
12. Inspect the bearing for wear. Spin the bearing, if the
bearing does not spin smoothly, replace it. To remove the
bearing, press the bearing off the shaft.
Inspect Sheave Surface
13. Inspect the cam (helix) assembly bushing for wear. If the
bushing is worn or the shaft does not fit snug into the
bushing, replace the cam (helix) assembly.
Inspect Bushing
CLUTCHING
6
6.21