Barco DP2K-32B Installation Manual page 45

Image 4-11
6. Gently remove the xenon lamp out of the Lamp House. Do not use excessive force upon the xenon lamp. Normally the xenon
lamp will easily slide out the cathode socket of the Lamp House.
Warning: Supporting the xenon lamp with one hand while pulling it out with other hand prevents it from bumping against the
chassis of the Lamp House.
Image 4-12
7. Place the xenon lamp in its protective container or wrap the xenon lamp in a protective cloth and secure with two binders.
Image 4-13
Left: Xenon lamp wrapped in a protective cloth. Right: Xenon lamp captured in a protective container.
8. Remove the adapter(s) from the xenon lamp by releasing the hexagon socket head set screw of the lamp adapter as illustrated.
Use for that a 2,5 mm Allen wrench.
Image 4-14
Reinstall the UV blocker assembly and the side cover in case you do not intend to install another xenon lamp
immediately in the Lamp House.
R59770491 DP2K-32B 30/04/2010
12
4. Lamp & lamp house
39