Fuji Xerox Color C60 User Manual page 53

No. Component
9 Staple cartridges for
booklet*1
10 Staple waste container
11 Staple cartridge
12 Hole punch waste container
13 Tri-Fold output tray*2
14 Tri-Fold output tray button*2 Press this button to open the Tri-Fold output tray.
15 Left cover
16 Interface module front cover Open this cover to clear paper jams.
*1 : Only available when the Finisher D4 with Booklet Maker is installed.
*2 : Only available when the Folding Unit (Z and C) is installed.
Note • The Finisher D4 and the Finisher D4 with Booklet Maker are optional. In this guide, the Finisher D4
and the Finisher D4 with Booklet Maker are referred to as the "finisher".
There are two staple cartridges installed for Booklet Creation (gutter). Take
the cartridges out when clearing staple jams, or when replacing them with
new ones.
Collects waste from the stapler. Remove this cartridge to replace the staple
waste container.
Contains staples. Remove this cartridge when you need to add staples or
clear staple jams.
Collects waste from the puncher. Remove this when emptying the container.
Delivers tri-folded (C fold and Z fold) copies.
Open this cover to access the interior of the machine to clear paper jams.
Machine Components
Function
2
53