Fuji Xerox Color C60 User Manual page 159

Change Quantity
Displays the [Change Quantity] screen on which you can change the number of copy sets
using the numeric keypad.
Change Settings
Displays the [Copy] screen on which you can change the settings for the next document.
After changing the settings, press the <Start> button on the control panel to start scanning
of the document. To return to the previous screen, press the < # > button.
Delete
Clears the document data stored by the Build Job feature, and cancels the job.
Note
Last Original
Select this button to end scanning of documents. The build job starts.
Next Original
Select this button when you have another document. This button is always selected when
you use the Build Job feature.
Start
After loading the next document, select this button to scan the next document.
Note
Sample Job
When making multiple sets of copies, you can print a sample set to check the finished output
and then print the remaining copy sets. You can select to continue or cancel the job after
the confirmation.
When using a stored program for Build Job
While the machine makes copies using the Build Job feature, you can use a stored program.
1) Select [Change Settings].
2) Select the [Job Assembly] tab.
3) Select [Stored Programming].
4) Select the number of the stored program that contains the features you want to use.
For information on how to register a stored program, refer to "Registering Stored Programs for Build Job" (P.285).
[Build Job - Chapter Start] Screen
1
Select any option.
Off
The next stack of documents is copied after the previous stack.
On
The next stack of documents is copied from Side 1 of a new sheet of paper.
• You can also press the <C (Clear)> or <Clear All> button on the control panel to perform the same
operation.
• While the machine is scanning the loaded document, [Delete] is displayed. Select [Delete] to pause
scanning. Select [Start] on the touch screen, or press the <Start> button on the control panel to
resume scanning.
• You can also press the <Start> button on the control panel to perform the same operation.
Job Assembly
3
159