Step 2 Selecting The Features - Fuji Xerox Color C60 User Manual
Hide thumbs
Also See for Color C60:
- System administrator manual (178 pages) ,
- Instruction manual (41 pages)
Table of Contents
Advertisement
4 Scan
Step 2 Selecting the Features
On the Services Home screen, you can select from seven Scan services: [E-mail], [Store to
Folder], [Store to USB], [Store & Send Link], [Store to WSD], [Network Scanning], and [Scan
to PC]. You can select features for each service.
Note
E-mail
Scans a document and sends the scanned data as an e-mail attachment after converting
the data to TIFF, JPEG, PDF, DocuWorks, or XML Paper Specification (XPS) file.
Store to Folder
Scans a document and saves the scanned data in a folder on the machine.
You need to create a folder in advance. For information on how to create a folder, refer to "5 Tools" > "Setup" > "Create
Folder" in the Administrator Guide.
Network Scanning
Scans a document using a job template created on CentreWare Internet Services.
When Scan to My Folder is enabled and the Remote Access feature is available, the scanned
data can be transferred to a different destination according to an authenticated user.
4
Scan to PC
Scans a document and sends the scanned data to a network computer via the FTP or SMB
protocol.
When Scan to My Folder is enabled and the Remote Access feature is available, the scanned
data can be transferred to a different destination according to an authenticated user.
Store to USB
Scans a document and saves the scanned data to a USB memory device.
Store & Send Link
Scans a document and temporarily saves the scanned data on the machine. The user is
notified by e-mail of the URL to the location where the scanned data is stored. Then, the user
can access the URL to retrieve the scanned data.
Store to WSD
You can scan documents set on the machine and save the scanned data from a computer. Also, you
can save the scanned data to a computer on the network.
170
• WSD stands for Web Services on Devices.
• The features displayed on the screen depend on your machine configuration.
• When the Accounting feature is enabled, a user ID and passcode may be required. Ask your system
administrator for the user ID and passcode.
Advertisement
Table of Contents
