Table of Contents
Advertisement
_ _ _ _ _ _ _ _ Chapter 7
Menu Settings
■
Switching Off LCD Monitor (LCD)
To save battery power, you should switch off the
LCD monitor when you are not viewing the LCD
screen such as recording of audio with still picture.
*
You can also use the remote control to set this.
0
Display the SET-UP screen.
Set the CAM/OFF/PLAY switch to CAM and press the MENU
button.
f)
Switch LCD between ON and OFF.
Press Tor
.A.
to select LCD, and then press
►
.
Pressing
►
alternates between LCD ON and OFF.
E)
Finish the setting.
Press the MENU button.
SET-UP screen
SET UP
► INITIAL
DISPLAY
ON
LCD
ON
PICTURE ADJ
T&
SEL
► ENTER
IMENUI EXIT
SET UP
INITIAL
DISPLAY
e
► LCD
PICTURE ADJ
T&
SEL
► ENTER
IMENUI EXIT
If you have specified LCD OFF, the picture will disappear by pressing MENU. When you have
specified LCD ON, the LCD ON/OFF setting has finished and the SET-UP screen will disappear.
*
Even when you do not press MENU, the setting will be finished automatically 60 seconds after the setting is
completed.
The LCD monitor will turn on, when you press the MENU button. LCD ON will set automatically
when power is turned on again after it has been off.
Advertisement
Table of Contents
