15
ELECTRICAL SYSTEM
15.6
Changing the low beam bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
Preparatory work
–
Switch off all power consumers and switch off the engine.
Main work
–
Turn socket
–
Pull the socket with low beam bulb
–
Disconnect the socket with the low beam bulb from connector
–
Connect the new socket with the low beam bulb to the connector.
Low beam (H11 / Sockel PGJ19-2) (
L02161-10
counterclockwise.
out of the headlight housing.
and remove.
p. 177)
132