Changing The High Beam Bulb - KTM 2015 RC 390 EU Owner's Manual

15 ELECTRICAL SYSTEM
15.7

Changing the high beam bulb

Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Position the socket with the low beam bulb in the headlight housing.
–
Turn the socket clockwise.
–
Check that the lighting is functioning properly.
L02166-10
Preparatory work
–
Switch off all power consumers and switch off the engine.
133