KTM 2015 RC 390 EU Owner's Manual page 155

18 SERVICE WORK ON THE ENGINE
–
Remove screws
–
Pull oil filter
Circlip pliers reverse (51012011000)
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing area.
101918-10
–
Insert oil filter
–
Lubricate the O-ring of the oil filter cover. Mount the oil filter cover
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover
Info
Too little engine oil or poor-quality engine oil results in premature wear to the
L02271-10
engine.
 . Remove the oil filter cover

out of the oil filter housing.

.
 with the O-ring.

.
M5 8 Nm (5.9 lbf ft)
153