Draining The Coolant - KTM 2015 RC 390 EU Owner's Manual

16 COOLING SYSTEM
16.5

Draining the coolant

Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not remove the radiator cap, radiator hoses or other cooling system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse immediately with lukewarm water.
Warning
Danger of poisoning Coolant is poisonous and a health hazard.
–
Coolant must not come into contact with the skin, eyes, or clothing. If contact occurs with the eyes, rinse with water immedi-
ately and contact a physician. Immediately clean contaminated areas on the skin with soap and water. If coolant is swallowed,
contact a physician immediately. Change clothing that is contaminated with coolant. Keep coolant out of reach of children.
Condition
The engine is cold.
Preparatory work
–
Remove the right side cover.
–
Remove the left side cover.
–
Remove the front spoiler. (
Main work
–
Stand the motorcycle upright.
–
Place a suitable container under the engine.
–
Remove screw
–
Remove the radiator cap.
–
Completely drain the coolant.
–
Mount screw
L02269-10
( p. 100)
( p. 97)
p. 93)

.

with a new seal ring and tighten it.
144