KTM 2015 RC 390 EU Owner's Manual page 121

14 WHEELS, TIRES
Preparatory work
–
Raise the motorcycle with the rear wheel stand. (
–
Remove the rear wheel.
Main work
–
Check bearing
» If the bearing is damaged or worn:
–
Change the rear wheel bearing.
–
Check the rubber dampers
» If the rubber dampers of the rear hub are damaged or worn:
–
Change all rubber dampers in the rear hub.
L02153-10
–
Lay the read wheel on a workbench with the rear sprocket facing upwards and insert the
wheel spindle in the hub.
–
To check the play
Info
Measure the play on the outside of the rear sprocket.
Play in rubber dampers, rear wheel
»
If play
L02152-10
–
Change all rubber dampers in the rear hub.
Finishing work
–
Install the rear wheel.
–
Take the motorcycle off of the rear wheel stand. (
( p. 116)

.

of the rear hub for damage and wear.

, hold the rear wheel tight and try to rotate the rear sprocket.
 is larger than the specified value:
( p. 117)
p. 78)
≤ 5 mm (≤ 0.2 in)
p. 78)
119