Checking The Rear Hub Rubber Dampers - KTM 2015 RC 390 EU Owner's Manual

14 WHEELS, TIRES
14.5

Checking the rear hub rubber dampers

Info
The engine power is transmitted from the rear sprocket to the rear wheel via 6 rubber dampers. They eventually wear out during
operation. If the rubber dampers are not changed in time, the rear sprocket carrier and the rear hub will be damaged.
–
Pull the rear wheel back and mount wheel spindle

adjuster
Info
Mount the left and right chain adjusters
–
Mount nut
–
Push the rear wheel forward so that the chain adjusters are in contact with the screws,
and tighten nut
Guideline
In order for the rear wheel to be correctly aligned, the markings on the left and right
chain adjusters must be in the same position relative to the reference marks
Nut, rear wheel spindle
–
Position wheel speed sensor
Guideline
Screw, wheel speed sensor
holder
L02150-13
Finishing work
–
Take the motorcycle off of the rear wheel stand. (
.

and washer.
 .

in the drill hole. Mount and tighten screw
M6
 with the washer and chain

in the same position.
M14x1.5 90 Nm
(66.4 lbf ft)
Loctite
9 Nm
(6.6 lbf ft)
p. 78)
118

.

.
® 243™