Checking The Low Beam Headlight Adjustment - KTM 2015 RC 390 EU Owner's Manual

15 ELECTRICAL SYSTEM
15.8

Checking the low beam headlight adjustment

A 0 0 A
–
Position the vehicle upright on a horizontal surface in front of a light wall and make a
mark at the height of the center of the low beam headlight.
–
Make another mark at a distance
Guideline
B 0 0 B
Distance
–
Position the vehicle perpendicular to the wall at a distance
on the low beam.
Guideline
400726-10
Distance
–
The rider, with luggage and passenger if applicable, now mounts the motorcycle.
–
Check the low beam headlight adjustment.
The light-dark boundary must lie exactly on the lower mark when the motorcycle is
ready to operate with the rider mounted along with any luggage and a passenger if
applicable.
» If the light-dark border does not meet specifications:
–
Adjust the headlight range of the low beam. (

under the first mark.


5 cm (2 in)
 from the wall and switch
5 m (16 ft)
p. 137)
135