Sanremo Verona RS Instruction Booklet page 57

Instructions for use and maintenance
13.2 - DISPENSING COFFEE
1) Remove the filter holder (1) from the unit (2) turn-
ing it in the direction of arrow "A" and throw away
any used coffee still remaining since the previous
dispensing.
2) Fill the filter holder with a dose of coffee (one dose
for one coffee and two doses for two coffees) and
clean the edge of the filter holder with the palm of
your hand, to remove excess coffee powder. In this
way perfect sealing between the filter holder and
the machine can be ensured.
3) Position the filter holder (1) under the unit (2), lift it
"B" until the tabs of the filter holder enter the slots in
unit (2), then turn the filter holder (1) in the direction
of arrow "C" fully, fitting it to unit (2).
4) After properly fitting the filter holder, place a previ-
ously heated cup under spout (3). Use two cups for
the double filter holder.
5) To start dispensing, press the button for the desired
type of coffee (espresso, long black, etc.), located
on button panel (4), the LED of the selected button
remains on while all other LEDs turn off; when the
set quantity is reached, dispensing stops automat-
ically.
6) After dispensing, leave the filter holder fitted to the
unit until the next dispensing.
02-2014
2
1
A
1
C
21 / 29-EN
VERONA RS
4
2
1
3
B
EN