Description Of Controls - Sanremo Verona RS Instruction Booklet

Instructions for use and maintenance

11. DESCRIPTION OF CONTROLS

• Steam tap knob (1)
When turned anti-clockwise, the knob dispenses
steam from the steam tap (2).
To stop dispensing steam, turn the knob clockwise
to close the tap.
1
2
• Button panel (3)
A. Button for espresso coffee
B. Button for long black coffee
C. Button for double shot espresso coffee
D. Button for double shot long black coffee
E. Button for continuous dispensing/unit program-
ming.
F. Button for hot water dispensing
A B C D
Button for espresso coffee dispensing (A)
Place a cup under the single filter holder, then press
the button to start dispensing coffee.
The LED of the selected button remains on for the
entire dispensing, while all other LEDs turn off.
When dispensing is concluded, all LEDs of the button
panel turn on.
Button for long black coffee dispensing (B)
Place a cup under the single filter holder, then press
the button to start dispensing long black coffee.
The LED of the selected button remains on for the
entire dispensing, while all other LEDs turn off.
02-2014
When dispensing is concluded, all LEDs of the button
panel turn on.
(C)
Place two cups under the double filter holder, then press the
button to start dispensing two coffees.
The LED of the selected button remains on for the
entire dispensing, while all other LEDs turn off.
When dispensing is concluded, all LEDs of the button
panel turn on.
Place two cups under the double filter holder, then press the
button to start dispensing two coffees.
The LED of the selected button remains on for the
entire dispensing, while all other LEDs turn off.
When dispensing is concluded, all LEDs of the button
panel turn on.
Position a cup of suitable capacity for the desired coffee
quantity under the filter holders.
Press the button to start dispensing coffee.
The LED of the selected button remains on for the
entire dispensing, while all other LEDs turn off.
When the desired coffee quantity is reached, press the
button again to stop dispensing; after 120 seconds the
dispensing stops automatically.
Position a cup of suitable capacity for the desired water
quantity under the tap.
Press the button to start dispensing; the LED of the
selected button remains on for the entire dispensing,
E F
while all other LEDs turn off.
Dispensing automatically stops when the quantity set
in the program is reached.
Dispensing can be stopped pressing the button.
15 / 29-EN
VERONA RS
Button for double espresso coffee dispensing
Button for double long black coffee dispens-
ing (D)
Button for continuous dispensing (E)
Button for hot water dispensing (F)
EN