General Warnings - Sanremo Verona RS Instruction Booklet

VERONA RS

1.1 - GENERAL WARNINGS

- This manual is an integral part of the
machine and must be stored carefully for
future consultation.
If it is lost or further information is needed,
contact the local dealership or the manu-
facturer.
- Before operating the machine, the opera-
tor must read this manual thoroughly and
must acquire deep knowledge of technical
specifications and controls.
- Before installing the machine, check that
the area is suitable for the size and weight
of the machine.
- The machine is not suitable for outdoor
installation.
- Do not install the machine near heat sourc-
es.
- This device can be used by children older
than 8 years or by people with diminished
physical, sensorial or mental capacities, or
without experience or required knowledge,
provided they are supervised or have
received instructions on safe use of the
device and understanding its risks.
- Do not use the device with wet hands or
bare feet.
EN
- Do not allow unauthorised and unqualified
personnel to operate, adjust or service the
machine.
Furthermore, refer to this manual for all
necessary operations.
- Before cleaning and/or servicing the ma-
chine and before removing any guard,
ensure that the main switch is on "OFF"
(O), so that power is disconnected from the
machine during the operation.
- The power supply grid of the purchaser
must be fitted with an automatic breaker
upstream of the machine main switch, as
Instructions for use and maintenance
well as a suitable grounding system meet-
ing all requirements of injury prevention
standards.
- Do not use adaptors, multiple plugs and/
or extensions.
- Do not use the machine if the power cable
is frayed or damaged.
- If operations are required on or near the
main switch, disconnect power from the
line to which the main switch is connected.
- Check that all safety devices (guards,
cases, microswitches, etc.) have not been
tampered with and are properly operating.
Otherwise, service them.
- Do not remove safety devices.
- To avoid personal danger, only use suitable
tools compliant with national safety stand-
ards.
- PAY UTMOST ATTENTION TO THE
WARNING LABELS OF THE MACHINE
EVERY TIME YOU OPERATE ON OR
NEAR THE MACHINE.
- Furthermore, the user must replace all
warning labels that are worn or unclear for
any reason, requesting spare ones from the
Spare parts service.
- If the machine is malfunctioning or com-
ponents are damaged, contact the local
dealership or the manufacturer.
- No one must use the machine for a
purpose other than the expected and
documented purpose.
Use of the machine must always take place
with the methods, timing and location set out
by good technical practice, in accordance
with current regulations and complying with
workplace health and safety standard as set
out by current laws of the country where the
machine is used.
4 / 29-EN
02-2014