Safety Protections; A - Mechanical Safety Devices; B - Electrical/Electronic Safety Devices; Operator Areas - Sanremo Verona RS Instruction Booklet

Instructions for use and maintenance

2.2 - SAFETY PROTECTIONS

There are two types of safety systems designed and
fitted to the coffee machine:
Mechanical safety devices
Electrical/electronic safety devices.

2.2.a - Mechanical safety devices

The mechanical safety devices are as follows:
- panel enclosing all electrical/electronic components
and the boiler, fully closed by screws;
- working surface fitted with grille and tray to collect
fluids;
- controls located on the top part of the machine,
above the dispensing areas;
- relief valve on the boiler;
- check valve on the water line.
2.2.b - Electrical/electronic safety devic-
es
The electrical/electronic safety devices are as follows:
- thermal breakers on motors;
- safety thermostats to monitor overheating;

2.3 - OPERATOR AREAS

The machine is operated by only one operator, who
stands in front of the machine to prepare coffee and
other hot drinks with ease.

2.4 - AREAS WITH RESIDUAL RISK

Residual risk areas are areas that cannot be protected
due to the specific type of operation they are used for;
on the coffee machine, these areas are as follows:
• the area of the units when dispensing coffee;
• the steam tap when heating drinks;
• the hot water dispensing area;
Risk of burning is present in all
three areas.

2.5 - DANGEROUS AREAS

Dangerous areas are all areas in-
side the machine, under the safety
guards, where the technician can
operate when servicing the ma-
chine.
These areas are accessible only by
the technician.
02-2014

3 - MACHINE DESCRIPTION

The following are the main features of the automatic
espresso coffee machine.
- Automatic powdered coffee machine with electronic
dosing control with programmable microprocessor
using a LED button panel and a touch screen. The
machine is also fitted with a button for continuous
manual dispensing. Available in a 2- or 3-unit ver-
sion.
7 / 29-EN
VERONA RS
EN