Finishing
When the optional offset tray is installed, job separation and offset printing
can be performed. For the installation procedure, refer to "Offset Tray" on
page 214. Settings for job separation and offset printing can be specified by
selecting
Use the following paper for job separation and offset printing.
Paper is fed to the sub output tray with job separation and offset print-
ing.
Job Separation Printing
When paper is fed to the sub output tray, the pages are fed out shifted as
shown below.
To perform job separation printing, select
MENU/FINISHING
110
Downloaded From ManualsPrinter.com Manuals
JOB SEPARATION
Width: 89 to 216 mm (3.5 - 8.5 inch)
Media Size
Length: 140 to 356 mm (5.5 - 14.0 inch)
or
FINISHING
.
in
.
PAPER MENU
in
SUB TRAY
PAPER
Finishing