Clear Cmos Jumper; Figure 4-8: At/Atx Power Mode Jumper Location; Table 4-2: At/Atx Power Mode Jumper Settings - IEI Technology PICOe-HM650 User Manual

PICOe-HM650 Half-size PCIe CPU Card
Jumper Settings:
Jumper Location:
The AT/ATX Power Select jumper specifies the systems power mode as AT or ATX.
Setting
Short 1-2
Short 2-3

Table 4-2: AT/ATX Power Mode Jumper Settings

Figure 4-8: AT/ATX Power Mode Jumper Location

4.4.2 Clear CMOS Jumper

Jumper Label:
Jumper Type:
Jumper Settings:
Jumper Location:
If the PICOe-HM650 fails to boot due to improper BIOS settings, the clear CMOS jumper
clears the CMOS data and resets the system BIOS information. To do this, use the jumper
cap to close pins 2 and 3 for a few seconds then reinstall the jumper clip back to pins 1
and 2.
See Table 4-2
See Figure 4-8
Description
Use ATX power (Default)
Use AT power
J_CMOS1
3-pin header
See T able 4-3
7
See F igure 4-9
7
Page 55