Table of Contents
Advertisement
Step 6:
In the following window, select a SATA controller mode used in the system. Then
press <Enter>. The user can now start using the SATA HDD.
Step 7:
After pressing <Enter>, the system will get into the recovery tool setup menu.
Continue to follow the setup procedure from
Partitions to finish the whole setup process.
B.7.2 System Memory Requirement
To be able to access the recovery tool by pressing <F3> while booting up the system,
please make sure to have enough system memory. The minimum memory requirement is
listed below.
Using Award BIOS: 128 MB system memory
Using AMI BIOS: 512 MB system memory.
Page 146
PICOe-HM650 Half-size PCIe CPU Card
Step 4
in Section B.2.2 Create
S t e p 0 :
Advertisement
Table of Contents
