Lvds Voltage Selection Jumper; Figure 4-10: Lvds Voltage Selection Jumper Location; Table 4-4: Lvds Voltage Selection Jumper Settings - IEI Technology PICOe-HM650 User Manual

PICOe-HM650 Half-size PCIe CPU Card

4.4.3 LVDS Voltage Selection Jumper

WARNING:
Incorrect voltages can destroy the LCD panel. Make sure to select a
voltage that matches the voltage required by the LCD panel.
Jumper Label:
Jumper Type:
Jumper Settings:
Jumper Location:
The LCD voltage selection jumper sets the voltage of the power supplied to the LCD
panel.
Setting Description
Short 1-2 +3.3 V (Default)
Short 2-3 +5.0 V

Table 4-4: LVDS Voltage Selection Jumper Settings

Figure 4-10: LVDS Voltage Selection Jumper Location

J_VLVDS1
3-pin header
See Table 4-4
See Figure 4-10
Page 57