Figure 4-9: Clear Cmos Jumper; Table 4-3: Clear Cmos Jumper Settings - IEI Technology PICOe-HM650 User Manual

If the "CMOS Settings Wrong" message is displayed during the boot up process, the fault
may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the
following:
Enter the correct CMOS setting
Load Optimal Defaults
Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.
The clear CMOS jumper settings are shown in
Setting
Short 1 - 2
Short 2 - 3

Table 4-3: Clear CMOS Jumper Settings

The location of the clear CMOS jumper is shown in

Figure 4-9: Clear CMOS Jumper

Page 56
PICOe-HM650 Half-size PCIe CPU Card
T able 4-3.
7
Description
Keep CMOS Setup (Default)
Clear CMOS Setup
F igure 4-9 below.
7