External Interface Panel Connectors; Internal Peripheral Connectors; Atx Power Supply Enable Connector; Table 3-2: Rear Panel Connectors - IEI Technology PICOe-HM650 User Manual

3.1.3 External Interface Panel Connectors

T able 3-2 lists the rear panel connectors on the PICOe-HM650. Detailed descriptions of
6
these connectors can be found in Section
Connector
Ethernet connector
USB 2.0 port
VGA port connector

Table 3-2: Rear Panel Connectors

3.2 Internal Peripheral Connectors

Internal peripheral connectors are found on the CPU card and are only accessible when
the CPU card is outside of the chassis. This section has complete descriptions of all the
internal, peripheral connectors on the PICOe-HM650.

3.2.1 ATX Power Supply Enable Connector

CN Label:
CN Type:
CN Location:
CN Pinouts:
The ATX power supply enable connector enables the PICOe-HM650 to be connected to
an ATX power supply. In default mode, the PICOe-HM650 can only use an AT power
supply. To enable an ATX power supply the AT Power Select jumper must also be
configured. Please refer to Section 4.4.1 for more details.
Page 16
PICOe-HM650 Half-size PCIe CPU Card
3 .3 on page
6
Type
RJ-45
USB port
15-pin female
ATXCTL1
3-pin wafer (1x3)
See Figure 3-2
See Table 3-3
4 0.
6
Label
LAN1, LAN2
USB_C1, USB_C2
CRT1