Document Processer; Detaching And Refitting The Document Processer - Kyocera FS-6025MFP/B Service Manual

1-5-10 Document processer

(1) Detaching and refitting the document processer

Procedure
1. Remove the restriction parts.
2. Open the document processer on verti-
cally.
3. Remove two screws and then remove
the DP interface connector.
4. Pull the document processer upwards
out.
Figure 1-5-47
DP
Figure 1-5-48
1-5-28
2K3/2L3
Restriction parts
DP
Screws
DP interface
connector