Kyocera FS-6025MFP/B Service Manual page 133

Code Contents
0870 FAX control PWB to main
PWB high capacity data
transfer error
High-capacity data transfer
between the FAX control PWB
and the main PWB of the
machine was not normally
performed even if the data
transfer was retried the speci-
fied times.
0920 Fax file system error
The backup data is not
retained for file system abnor-
mality of flash memory of the
FAX control PWB.
1010 Lift motor error
After cassette 1 is inserted, lift
sensor does not turn on within
12 s. This error is detected
four times successively.
Causes
Improper installa- Reinstall the FAX control PWB.
tion FAX control
PWB.
Defective FAX con- Replace the FAX control PWB or main PWB
trol PWB or main and check for correct operation (see page 1-
PWB. 5-33).
Defective FAX con- Replace the FAX control PWB and check for
trol PWB. correct operation.
Defective bottom Check to see if the bottom plate can move
plate elevation smoothly and repair it if any problem is
mechanism in the found.
cassette.
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector.
Lift motor and engine PWB (YC1)
Defective drive Check if the gears rotate smoothly. If not,
transmission sys- grease the bushes and gears. Check for
tem of the lift broken gears and replace if any.
motor.
Defective lift motor. Replace the lift motor.
Defective engine Replace the engine PWB and check for cor-
PWB. rect operation (see page 1-5-34).
1-4-9
Check procedures/
corrective measures
2K3/2L3