Detaching And Refitting The Registration Cleaner; Detaching And Refitting The Mp Tray - Kyocera FS-6025MFP/B Service Manual

(4) Detaching and refitting the registration cleaner

Procedure
1. Open the right cover 1.
(See page 1-5-11)
2. Open the front cover. (See page 1-5-3)
3. Open the developing cover.
(See page 1-5-17)
4. Set the cleaner lever (yellow) up and
draw the registration cleaner frontward.
5. Check or replace the registration
cleaner and refit all the removed parts.

(5) Detaching and refitting the MP tray

Procedure
1. Open the MP tray.
2. Release two fulcrums of the MP tray by
using a flat screwdriver.
3. Pull two straps upwards to remove.
4. Remove the MP tray.
Regist cleaner
Figure 1-5-24
Fulcrum
Flat screwdriver
Figure 1-5-25
1-5-15
Cleaner lever(yellow)
Fulcrum
Flat screwdriver
Straps
MP tray
2K3/2L3