Kyocera FS-6025MFP/B Service Manual page 201

4. Remove the stop ring from the rear side
of conveying unit and then remove the
link F.
5. To similar,remove the stop ring from the
rear side of conveying unit and then
remove the link R.
6. Rotate the wire cover.
7. Remove the connector.
8. Rotate the fulcrum axis and slide it for-
ward.
9. Pull the right cover 1 backward and
then remove it.
Link F
Stop ring
Figure 1-5-68
Wire cover
Connector
Fulcrum axis
Figure 1-5-69
1-5-39
2K3/2L3
Conveying unit
Link R
Stop ring
Right cover1