Kyocera FS-6025MFP/B Service Manual page 176

5. Remove a spring in the middle at the
back of the conveying unit.
6. Remove the transfer roller unit.
(See page 1-5-20)
7. Remove two springs at the front and
back of the registration roller.
8. Remove the cap and gear.
9. Slide and remove the registration roller.
10. Check or replace the registration roller
and refit all the removed parts.
Conveying unit
Figure 1-5-22
Registration roller
Spring
Figure 1-5-23
1-5-14
2K3/2L3
Spring
Cap
Gear
Spring
Right cover 1