Tray 2 Solenoid Assy; Roller Holder Assy - Konica Minolta bizhub 20 Service Manual

10.11 Tray 2 Solenoid ASSY

(1) Remove the bind B M3x10 Taptite screw, and then remove the tray 2 solenoid ASSY.
(2) Remove the Solenoid release spring P/R from the tray 2 solenoid ASSY.
Solenoid release spring P/R

10.12 Roller Holder ASSY

(1) Push the Lift arm to the direction of the arrow 1a and pull out the pin of the Roller holder
ASSY. Then, turn the Roller holder ASSY to the direction of the arrow 1b.
Taptite, bind B M3x10
Tray 2 solenoid ASSY
Fig. 5-232
Pin
Lift arm
1b
1a
Fig. 5-233
5-169
Tray 2 frame L
Roller holder ASSY
Tray 2 paper feed frame
Confidential