Document Eject Tray; Document Cover Sensor - Konica Minolta bizhub 20 Service Manual

9.8.34 Document Eject Tray

(1) Remove the ADF document output support flap from the Document cover.

9.8.35 Document Cover Sensor

(1) Disconnect the Connector from the Document cover sensor.
(2) Pull the Document cover sensor downwards to remove it from the Document cover while
pressing the Hook of the Document cover sensor.
Document cover sensor
<Back side>
Connector
Document cover
Boss
ADF document output support flap
<Front side>
Fig. 5-89
Hook
1
2
2
Document cover sensor
Fig. 5-90
5-80
Document cover
Hook
2
2
Confidential