Konica Minolta bizhub 20 Service Manual page 504

This page provides reference information. It is possible to get the full instructions of the
subjects listed by just clicking on the links below.
1. Error codes
(Refer to "3. ERROR CODES" in Chapter
2. Error message
(Refer to "2. DISTINGUISH ERROR CAUSE" in Chapter
3. Diameter of rollers
(Refer to "5.2 The pitch which appears in the image caused by failure of a roller." in
Chapter 3.)
4. Periodical maintenance parts
(Refer to "1.1 Periodical Maintenance Parts" in Chapter
5. Reset parts life
(Refer to "5.1 Resetting the Periodical Maintenance Parts Life" in Chapter
6. Machine specification
(Refer to "2. SPECIFICATIONS LIST" in Chapter
7. Paper specification
(Refer to "2.6 Paper" in Chapter
REFERENCES
3.)
1.)
1.)
App. 4-1
3.)
4.)
6.)
Confidential