High-Voltage Ps Pcb Assy - Konica Minolta bizhub 20 Service Manual

9.37 High-Voltage PS PCB ASSY

(1) Remove the four bind B M4x12 Taptite screws, and then remove the Base plate HV.
Pin
(2) Remove the bind B M4x12 Taptite screw, and then remove the HV insulation sheet.
HV insulation sheet
Taptite, bind B M4x12
Pin
Fig. 5-171
Pin
Pin
Fig. 5-172
5-133
Base plate HV
Taptite, bind B M4x12
<Front side>
Taptite, bind B M4x12
Confidential