9.8.15 ADF Motor
(1) Remove the two screw pan (S/P washer) M3x6, and then remove the ADF motor.
Screw, pan (S/P washer) M3X6
(2) Remove the three cup S M3x8 Taptite screws, and then remove the Motor frame ASSY.
Taptite cup S M3x8
View A
<Back side>
Assembling Note:
• When assembling the Motor frame ASSY, ensure that the gears (indicated with
gray) are placed in the positions as shown in the figure below.
Motor frame ASSY
Motor frame ASSY
Fig. 5-56
Motor frame ASSY
Fig. 5-57
Switch back solenoid ASSY
Arm ASSY switch back
Fig. 5-58
5-62
ADF motor
<View A>
Screw positions
PF solenoid ASSY
Confidential