Received Data Transfer Function (Function Code 53) - Konica Minolta bizhub 20 Service Manual

4.14 Received Data Transfer Function (Function code 53)

<Function>
This function transfers received FAX data to another machine. It is useful when the machine
cannot print received data due to the printing mechanism being defective.
Note:
• The number of files that can be transferred at a time is 99. To transfer 100 files or
more, carry out the following procedure more than one time.
<Operating Procedure>
(1) Press the [5] and [3] keys in this order in the initial stage of the maintenance mode.
The "FAX TRANSFER" appears on the LCD.
(2) To check the number of received files, press the [1] key.
The "1.NO. OF JOBS" appears on the LCD.
Press the [OK] button, and the number of received files appears, just as "NO. OF. JOBS:
10."
(3) To transfer the activity report only, press the [2] key.
The "2.ACTIVITY" appears.
To transfer received files (together with the activity report), press the [3] key.
The "3.DOCUMENTS" appears. Note that if there is no received file, the "NO
DOCUMENTS" appears.
(4) To transfer the communication list for the latest communication, press the [4] key.
The "4.COM.LIST (NEW)" appears.
To transfer the communication list for last three errors, press the [5] key.
The "5.COM.LIST (ERR3)" appears.
(5) With the "2.ACTIVITY," "3.DOCUMENTS," "4.COM.LIST (NEW)," or "5.COM.LIST
(ERR3)" being displayed, press the [OK] button.
The "ENTER NO. & SET" appears.
(6) Enter the telephone number of the receiver machine and press the [OK] button again.
Note:
• Be sure to type the telephone number with the numerical buttons. No one-touch
dialing is allowed in this procedure.
The machine displays the "ACCEPTED" for approx. two seconds and starts
dialing to transfer data.
No station ID will be attached. A cover page and end page as shown on the
next page will be automatically attached, instead.
6-25
Confidential