Konica Minolta bizhub 20 Service Manual page 374

(4) Remove the tray 2 solenoid harness from the hooks of the tray 2 drive unit.
tray 2 solenoid
harness
Tray 2
solenoid ASSY
(5) Remove the cup S M3x6 Taptite screw.
(6) Remove the four bind B M4x12 Taptite screws, and then remove the tray 2 drive unit.
Taptite, bind B M4x12
Tray 2 drive unit
Taptite, cup S M3x6
Ground wire top
Hooks Hooks
Fig. 5-227
Fig. 5-228
5-167
Tray 2 drive unit
Taptite, bind B M4x12
Tray 2 frame L
Confidential