FLASH as 1st digit will activate dial tone detect.
FLASH not as 1st digit will generate a flash on the outside line.
SPEED as 1st digit sends the remaining digits as ISDN Keypad Facility
message.
'*' as 1st digit enables Display Security and the stored number will not
be displayed when used.
'*' not as 1st digit activates Dial Pulse to Tone Switchover; the system
will switch from pulse to tone dialing. Pulse to tone conversion is only
activated on outside lines configured for pulse dialing.
When entering a Speed Dial, a 16-character name may be associated with
the number for Dial by Name.
To place a call using Station Speed Dial:
Press the SPEED button,
Dial the desired Station Speed Dial bin number (000-099).
Or
Press the assigned Station Speed Dial button.
To enter a Station Speed Dial number with outside Line and Name:
Press the TRANSFER (PGM) button and the SPEED button.
Dial the desired Station Speed Dial number,
Select/dial the outside line or group number,
Dial the desired number to be stored,
Press the HOLD (SAVE),
Enter a name up to 16 characters, if desired. For details on character
entry, see 1.6 Entering Text
Press the HOLD (SAVE).
4.3.5
Using Dial by Name and Entering Your Name
Dial by Name employs three different Directories: Private directory (Station
Speed dial), Public Directory (System Speed dial), or Station Name
(Intercom directory).
LIP-9002 User Guide - ST
.
27