Fixture Information; Reset Functions; Special Functions - ProLights PIXIE BEAM User Manual

18
- Back Light - Backlight display Auto Off. This feature allows you to automatically turn off the backlight
after a specified time that you can set using the arrow buttons. To have the display always on select
- Flip Display - Orientation of the display. This function allows you to rotate the display 180° to get a
better view of the display when the unit is hanging upside down. Select ON to activate or OFF to
disable this function.
• Press the ENTER button to confirm your choice.
• Press the MODE/ESC button repeatedly to exit the menu and save changes.

3.18 FIXTURE INFORMATION

To view all the information on the device, proceed as follows:
• Press the MODE button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Information, then press the ENTER button to
enter the next menu.
- Lamp Temperature - Through the Temperature function can be displayed the temperature inside the
fixture, near the lamp. The temperature can be displayed in degrees Celsius or Fahrenheit.
• Press the MODE/ESC button repeatedly to exit the menu.

3.19 RESET FUNCTIONS

You can start a preset program to restore the selected function:
• Press the MODE button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Set, then press the ENTER button to enter the
next menu.
• Press the UP/DOWN button to scroll through the menu, select Reset and press the ENTER button to
enter the next menu.
• Press the ENTER button to confirm your choice and wait for the recovery of the selected function.

3.20 SPECIAL FUNCTIONS

For the PIXIE BEAM you can access the following special functions:
No Signal
Select this feature to set the preferred mode of operation to be activated in case the drive is not present
no DMX signal input:
• Press the MODE button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Set, then press the ENTER button to enter the
next menu.
• Press the UP/DOWN button to scroll through the menu, select UI Set, and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select No Signal and press ENTER to confirm.
• Press the UP/DOWN button to select the preferred mode of operation: Close/Hold/Auto/Music.
• Press the ENTER button to confirm your choice.
• Press the MODE/ESC button repeatedly to exit the menu and save changes.
Fans Mode
Select this function to set the fans operation mode:
• Press the MODE button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Set, then press the ENTER button to enter the
next menu.
PIXIE BEAM