Fixture Settings; Lamp Settings; Display Settings - ProLights PIXIE BEAM User Manual

3.15 FIXTURE SETTINGS

You can change the parameters for the device by following these steps:
• Press the MODE button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Set, then press the ENTER button to enter the
next menu.
• Press the UP/DOWN button to scroll through the menu, then select Movement and press the ENTER but-
ton to enter the next menu.
• Use the UP/DOWN button to select the option proposed and press the ENTER button to confirm the
setting.
- Pan Reverse - Pan rotation in the opposite direction. Select OFF to deactivate the function (normal
setting); ON to activate the function (Pan Reverse).
- Tilt Reverse - Used for reversing tilt movement. Select OFF to deactivate the function (normal setting);
ON to activate the function (Tilt Reverse).
- Pan Degree - Angle of Pan. Select 540° or 630° to set the maximum angle of rotation of the moving
head.
- Encoders - Reorganization Pan/Tilt position after rolling away. Select OFF to deactivate or ON to ac-
tivate the function.
- Move Mode - Type of movement of the moving head. Select Standard to obtain a fast and fluid move-
ment of Pan/Tilt, Smooth for a slower and softer movement of Pan/Tilt.
• Press the ENTER button to confirm your choice.
• Press the MODE/ESC button repeatedly to exit the menu and save changes.

3.16 LAMP SETTINGS

You can change the parameters of the device lamp by following these steps:
• Press the MODE button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Lights, then press the ENTER button to enter
the next menu.
• Press UP/DOWN to scroll through the menu, select one of the following settings and press the ENTER
button to display it.
- Max Temperature - Temperature operating limits. This function allows you to set the maximum tem-
perature inside the projector, after which the lamp will automatically turn off. Press the arrow but-
tons to set the desired temperature (80° -139°). Temperatures of less than 90°C are not critical. We
recommend that you enable this feature for temperatures higher than 90°.
- Lamp Adjust - Adjusts the lamp. This function allows you to modify all the parameters of the lamp: Pan,
... , etc. Press the UP/DOWN button to select one of the parameters and press ENTER to edit the value
(000-255) through the UP/DOWN button.
• Press the ENTER button to confirm your choice.
• Press the MODE/ESC button repeatedly to exit the menu and save changes.

3.17 DISPLAY SETTINGS

You can change the following parameters related to the display, following the same procedure:
• Press the MODE button to access the main menu.
• Press the UP/DOWN keys to scroll the menu, select the Setup, then press the ENTER button to enter the
next menu.
• Press UP/DOWN to scroll through the menu, then select UI Set, and press the ENTER button to enter the
next menu.
• Press UP/DOWN to scroll through the menu, and then select one of the following settings for the dis-
play and press the ENTER key to display it.
PIXIE BEAM
17