Display Settings; Fixture Information - ProLights DIAMOND19CC User Manual

• Press UP/DOWN to scroll through the menu, select one of the following settings and press the ENTER
button to display it.
- Max Temperature - Temperature operating limits. This function allows you to set the maximum tem-
perature inside the projector, after which the lamp will automatically turn off. Press the arrow but-
tons to set the desired temperature (60° -130°). Temperatures of less than 90° C are not critical. We
recommend that you enable this feature for temperatures higher than 90°.
- Lamp Adjust - Adjusts the lamp. This function allows you to modify all the parameters of the lamp:
Control, Pan, Pan Fine, Tilt, Tilt Fine, Pan&Tilt Speed, Pan&Tilt Fun, Shutter Fun, Shutter, Dimmer, Color Function,
Virtual Color1, Virtual Color2, Red-All, Green-All, Blue-All, White-All, Zoom, Red-A, Green-A, Blue-A, White-A, Red-B,
Green-B, Blue-B, White-B. Press the UP/DOWN button to select one of the parameters and press ENTER
to edit the value (000-255) through the UP/DOWN button.
• Press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and save changes.

3.19 DISPLAY SETTINGS

You can change the following parameters related to the display, following the same procedure:
• Press the ENTER button to access the main menu.
• Press the UP / DOWN keys to scroll the menu, select the Setup icon, then press the ENTER button to
enter the next menu.
• Press UP / DOWN to scroll through the menu, then select UI Set, and press the ENTER button to enter
the next menu.
• Press UP / DOWN to scroll through the menu, and then select one of the following settings for the dis-
play and press the ENTER key to display it.
- Back Light - Backlight display Auto Off. This feature allows you to automatically turn off the backlight
after a specified time that you can set using the arrow buttons. To have the display always on select
Always On or set a value of 01-99 min to turn off the display after the amount of time you choose.
- Flip Display - Orientation of the display. This function allows you to rotate the display 180° to get a
better view of the display when the unit is hanging upside down. Select ON to activate or OFF to
disable this function.
- Bright Display - Backlight Brightness. Use the arrow buttons to select a value from 0-31.
- Brand Show - Displaying the brand. This function allows you to show the brand "PROLIGHTS" on the
display. Select ON to activate or OFF to disable.
- Key Lock - Lock keys. With this function, you can lock the buttons on the control panel. If this function
is activated, the keys are automatically locked. To disable or temporarily disable the key lock func-
tion, press the buttons in the following order to regain access to menu commands: UP, DOWN, LEFT,
RIGHT, ENTER. Select ON to activate or OFF to disable.
- Language select - Select the display language. This function allows you to select the preferred menu
language.
• Press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and save changes.

3.20 FIXTURE INFORMATION

To view all the information on the device, proceed as follows:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the icon Information, then press the ENTER but-
ton to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select one of the following information
and press the ENTER button to display it.
- Time Information - Through the Time Information function you can display the operating time of the projector.
- Lamp Info - Through the Lamp Info function you can display the lamp information.
DIAMOND19CC
21