ProLights PIXIE BEAM User Manual page 43

• Press the UP/DOWN button to scroll through the menu, select UI Set, and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, and then select Fans Mode and press ENTER to
confirm.
• Press the UP/DOWN button to select Auto Speed /High Speed , press the ENTER button to confirm your
choice.
• Press the MODE/ESC button repeatedly to exit the menu and save changes.
Hibernation
Select this function to activate the standby mode. This function will be activated automatically after a
period of inactivity, which is defined by the user. In standby mode, the lamp and all engines will not be
fed if no signal is sent. The unit will automatically reset and will return to operation as soon as the DMX
signal is sent.
• Press the MODE button to access the main menu.
• Press the UP/DOWN button to scroll through the menu, select the Set, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select UI Set, and press the ENTER button to
enter the next menu.
• Press the UP/DOWN to scroll through the menu, select Hibernation and press ENTER to confirm.
• Select the desired time through the arrow keys or select Not Hibernation to disable this function, then
press the ENTER button to confirm your choice.
• Press the MODE/ESC button repeatedly to exit the menu and save changes.
Calibration
Select this function to calibrate and adjust the wheels of the effects in their correct positions:
• Press the MODE button to access the main menu.
• Press the UP/DOWN button keys to scroll the menu, select the Set, then press the ENTER button to enter
the next menu.
• Press the UP/DOWN button to scroll through the menu, then select Calibration and press the ENTER but-
ton to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select Password and press ENTER to confirm.
• Use the arrow keys to enter the password 050 and press ENTER to confirm.
• Once you have entered your password, you can set the values for Pan, ..., etc. Press the UP/DOWN button
to scroll through the menu, select one of the functions mentioned above and press ENTER to confirm
your choice.
• Use the arrow buttons to enter the desired value, then press the ENTER button to confirm your choice.
• Press the MODE/ESC button repeatedly to exit the menu and save changes.
Reload Default
Select this function to reset the unit to factory settings:
• Press the MODE button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Set, then press the ENTER button to enter the
next menu.
• Press the UP/DOWN button to scroll through the menu, select Reload Default and press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to select ON or OFF, then press the ENTER button to confirm.
Software Version
• Through Software Version function you can display the currently installed software version.
PIXIE BEAM
19