Maintenance and Servicing
5.8.7
Automatic filling unit
Optionally, the solution tank can be filled via the automatic filling unit.
Attention
According to DIN EN 1717, the automatic filling unit must not be
operated without a system separator (operating manual).
max. 50 °C
B
Fig. 38:
1. Fit the water connection Fig. 38-A. Do not yet open the water supply!
2. Push the operating button Fig. 38-B. The indicator knob Fig. 38-C pro-
trudes.
3. Open the water supply – water starts to flow.
4. The filling unit switches off automatically when the tank is full. The indicator
knob Fig. 38-C no longer protrudes.
5. Close the water supply and remove the water connection. Use a water line
fitted with a stop valve!
Note
The machine can also be filled manually through the opening in the
operating button Fig. 38-B. Check the level in the level indicator
Fig. 35-6.
74
min. 2.5 bar
max. 6 bar
A
C
05-7175-00-00.fm