Advertisement
Hako Scrubmaster B75 R
1
1. Disconnect mains plug of the charger and put it in front of the seat 1.
2. Fill the clear water tank from opening 2. Control the filling level by the
filling level indication 3.
3. Switch the mahchine on by the key switch 4. Actuate drive direction from
switch
5.
4. Press green button
turbine switches on.
5. Press pedal
10
to adjust the water ( if necessary )
NOTE! Make sure that pads / brushes are installed!!!
Qualified persons only are authorised to operate the machine!
The machine is not designed for coarse material! Floor area sweeping before!
Use only cleaning agents suitable for automatic machines (low-foaming)!
Please pay attention to the informations in the instruction manual!
OPERATION
6
to lower brush head
9
machine moves and brush head drive switches on. Use lever
2
3
10
8
7
7
and squeegee 8, suction
4
5
6
9
Advertisement
Table of Contents
Related Manuals for HAKO Scrubmaster B75 R
Summary of Contents for HAKO Scrubmaster B75 R
- Page 1 Hako Scrubmaster B75 R OPERATION 1. Disconnect mains plug of the charger and put it in front of the seat 1. 2. Fill the clear water tank from opening 2. Control the filling level by the filling level indication 3.
- Page 2 Hako Scrubmaster B75R MAINTENANCE AND CARE: Daily maintenance: Weekly maintenance: Empty clear water tank by opening the Check and clean brush head / brush head fresh water filter covering 1. ( lever which sealing strip 10. adjusts the water must be open ) ...
Need help?
Do you have a question about the Scrubmaster B75 R and is the answer not in the manual?
Questions and answers